Waterproof Scraping PVC Decorative Film Meet International Non Toxic Standard

To validate the superior Waterproof and protective properties of our PVC Decorative Film, we subject our materials to extreme environmental stress tests. The following data serves as a technical endorsement of our product's physical integrity:

I. Hydrostatic & Chemical Resistance (Waterproof Validation)

Test Condition: Continuous immersion in 5%NaCl (Saline) and distilled water at 40°C for 720 hours.

Result: Zero swelling, no interlayer delamination, and <0.01% moisture absorption.

Technical Edge: Ensures long-term stability in high-humidity zones like kitchens and coastal commercial spaces.

II. Thermal & Dimensional Stability

Test Condition: Cycling from -20°C to +100°C for 10 cycles (Thermal Shock Test).

Result: Dimensional shrinkage <0.15%; no surface cracking or adhesive crystallization.

Benefit: Suitable for diverse climates and proximity to heat-generating kitchen appliances.

III. Non-Toxic & Safety Certification

Standard: EN 71-3 / REACH Compliance.

Lead (Pb) & Cadmium (Cd) Content: Below detectable limits (<10 ppm).

Formaldehyde Emission: Resulting in E0 Grade (<0.5 mg/L), ensuring the safest air quality for residential applications.

IV. Mechanical Endurance (Scraping Resistance)

Scratch Test: Hardness rating of 2H-4H (Pencil Hardness Test).

Result: Surface remains intact under a 500g load, proving the film's "scraping" resistance during high-volume manufacturing and daily use.

Structural Specifications & Trade Logistics

(Optimized for Global Procurement Standards)

Scenario-Based Strategic Applications

The high-density waterproof layer of our PVC Decorative Film makes it the preferred surface solution for:

High-Moisture Environments: Cabinetry and wall paneling in bathrooms and kitchens where steam and water contact are constant.

Public Infrastructure: High-traffic areas requiring moth-proof and fire-retardant materials, such as hotel corridors and office lobbies.

Furniture Manufacturing: Precision wrapping for MDF, particleboard, and fiberboard to replace expensive solid wood.

Industrial Linings: Enhancing metal plates, aluminum extrusions, and high-pressure cement boards with a tactile, vibrant finish.

With over ten years of experience in hot stamping foil manufacturing, we pride ourselves on quality products, competitive pricing, and excellent service. We offer free samples (customer pays freight) and welcome opportunities for long-term cooperation.